Aquatronic Automatic Swimming Pool Cover Roller (up to 5m)

The Certikin Aquatronic Roller system is a semi-automatic roller designed for domestic and light commercial applications and
will comfortably accommodate all styles of Certikin floating cover.
The system can be floor or wall (back or side) mounted and is suitable for both indoor and outdoor installations.
Our new control panel offers a range of benefits and control options to ensure ease of installation and use.

• No hard wiring required, plugs directly into mains

• Trickle charge battery fitted to allow continuous supply in event of power disruption

• Lock out on front of control panel to completely eliminate unwanted use

• Thermal cut-out to protect motor and prolong life

• Easy to read and use LCD display

• Operation from controlpanel or radio remote fob, with remote key switch or push button option available

• Full control instruction available in hard copy or electronic format

• Powerful R60 80G 24V motor with adjustable limits

Points to consider when ordering an Aquatronic Roller.

1. The motor is pre-installed into the roll-up tube and is
complete with a 15 metre long, 8mm diameter, 7 core
YY control cable which feeds back to the main control 
panel.
2. The cable can be extended using standard 10amp
electrical connections, but the overall cable length
should be limited to 30 metres. Please ask at the point
of order or specify on the Aquatronic Roller order
form if extra cable is required.
3. The control panel includes an adjustable time delay
function which allows time for the user to move from
the control station (either key switch, push button or
radio remote) to the pool side to begin guiding the
cover. For the key switch and push button this time is
adjustable up to 30 seconds, for the radio remote this
is adjustable up to 5 seconds - this should be
considered when planning the location of the
control station.
4. The key switch is a 3 position ‘stay-put’ switch and is
connected to the main control panel by a minimum
0.5mm2 standard 3 core cable (not supplied). The push
button is pre wired with a 15m signal cable.
5. If ordered with a cover, the cover will be pre-secured
to the roller and calibrated for basic start and stop
position, but some fine tuning of calibration will be
needed on site at point of installation.
6. Covers are connected via a 6mm nylon rod fed through
the back edge of the cover / connection piece (please
see page 146 of the Certkin price list for full options).
Please inform of distance from pool edge to final
planned roller position at point of order.
7. For pools with limited surrounding space, the motor
mounting plate can be used as a wall mounting plate
for both the motor and / or non-motor end of the roller.
8. Pricing is for roller only. Please price for cover
connection piece and towing kit separately.
9. The Aquatronic roller is a semi automatic product.
Floating covers require a towing boom and manual
guidance to manoeuvre them on and off the pool.